What Is Column?
• A compression member, i.e., column, is an important element of every reinforced concrete structure. These are used to transfer a load of superstructure to the foundation safely.
• Mainly columns, struts, and pedestals are used as compression members in buildings, bridges, supporting systems of tanks, factories, and many more such structures.
• A column is defined as a vertical compression member who is mainly subjected to the effective length and axial loads of which exceeds three times its least lateral dimension.
• The compression member whose effective length is less than three times its least lateral dimension is called Pedestal
• The compression member who is inclined or horizontal and is subjected to axial loads is called Strut. Struts are used in trusses.
• The function of columns is to transfer the load of the structure vertically downwards to transfer it to a foundation. Apart from the wall performs the following functions also:
(a) It encloses building areas into different compartments and provides privacy.
(b) It provides safety from burglary and insects.
(c) It keeps the building warm in cools in summer and winter.
Also, read: What Is Lap Length | Lap Length of Column | Lap Length of Slab | Lap Length of Beam
What Is Column End Conditions?
• How much load a column can bear also depends on column end conditions.
• The column with fixed end conditions at both ends will be stronger, then the second column of the same size, length, and material but having both ends free.
• The ability to carry a load will be different for both columns.
• The effective length of a column is calculated after knowing the column end conditions.
• Effective length changes with the change in column end conditions. The following are the column end conditions.
Also, read: How to Load Calculation on Column, Beam, Wall & Slab
Type of Column End Conditions
• Both Ends Hinged
• Both Ends Fixed
• One End Fixed and Other Hinged
• One End Fixed and Other Free
Both Ends Hinged
• The effective length of other end conditions can be found with reference to this condition.
• This is the standard column end condition. Effective length in this condition is equal to the length of the column.
• In this condition, both ends of the column are either pinned, pivoted, or rounded. As shown in the figure below.
l_{e} = L
Where,
l_{e} = Equivalent length
L = Actual Length
Both Ends Hinged
Both Ends Fixed
• Column load-bearing capacity increases with the decrease in column equivalent length.
• This is the strongest column end condition. Both ends fixed column carries the maximum load, and effective length for this condition is considered as half of the total column length. As shown in the figure below.
l_{e} = L/2
Where,
l_{e} = Equivalent length
L = Actual Length
Both Ends Fixed
Also, read: What Is Plaster | Type of Plaster | Defects In Plastering
One End Fixed and Other Hinged
• In this condition, one end of a column is stronger, while the other end is very weak. The equivalent length for this end is as follows.
l_{e} = L/√2
Where,
l_{e} = Equivalent length
L = Actual Length
One End Fixed and Other Free
• This end condition makes columns to bear the smallest load than all other end conditions. The column in such a condition is very weak. Equivalent length for one end fixed and other free is as follows.
l_{e}= 2L
Where,
l_{e} = Equivalent length
L = Actual Length
Also, read: Difference Between Bitumen and Tar | What Is Bitumen | What Is Tar
What Are Effective Lengths of Columns?
• The critical loads for columns with various support conditions can be related to the critical load of a pained-end column through the concept of an effective length.
• To demonstrate this idea, consider the deflected shape of a column fixed at the base and free at the top as below fig.
• This column buckles in a curve that is one-quarter of a complete sine wave. If we extend the deflection curve as below figure, It becomes one-half of a complete sine wave, which is the deflection curve for the pinned-end column.
• The effective length L_{e} for any column is the length of the equipment pinned-end column. That is, it is the length of a pinned-end column having a deflection curve that exactly matches all or part of the deflection curve of the original column.
• Another way of expressing this idea is to say that the effective length of a column in the distance between points of inflection (that is, points of zero moments) in its deflection curve, assuming that the curve is extended (if necessary) until points of inflection are reached.
• Thus, for a fixed-free column, the effective length is L_{e} = 2L.
• Because the effective length is the length of an equivalent pinned-end column, we can write a general formula for critical loads as follows:
P_{cr} = π^{2}EI / L_{e}^{2}
• If we know the effective length of a column (no matter how complex the end conditions may be), we can substitute into the preceding equation and determine the critical load.
• For instance, in the case of a fixed-free column, we can substitute L_{e} = 2L and obtain.
• The effective length is often expressed in terms of an effective-length factor K: L_{e }= KL
• Where L is the actual length of the column. Thus, the critical load is
P_{cr} = π^{2}EI / KL^{2}
• The factor K equals 2 for a column fixed at the base and free at the top and equals 1 for a pinned-end column.
• The effective- length factor is often included in design formulas for columns.
Various k Factors and Column Effective Length
Sr.No. | Shape of Column | Column Postion | Effective Length Factor | Effective Length |
---|---|---|---|---|
1. | Both End Fixed. | k = 0.5 | L_{e} = 0.5 l _{a} | |
2. | One End Pinned Joint and One End Fixed Joint. | k = 0.7 | L_{e} = 0.7 l _{a} | |
3. | Both End Pinned Joint. | k = 1.0 | L_{e} = 1.0 l _{a} | |
4. | One end Fixed Joint and One End Free. | k = 2.0 | L_{e} = 2.0 l _{a} |
Also, read: What Is Classification of Bricks | Classification of Bricks Different Base
Equivalent Lengths of Columns for Various End Conditions.
Like this post? Share it with your friends!
Suggested Read –
Leave a Reply